How to save electricity: Simple recommendations that always work
Every month, with the payment of utility bills, we all remember how to save electricity.
After all, such an article is one of the most basic in the average family budget.Housing and community services are increasing year by year, so this issue is very relevant.
Proper use of lighting products
Where do you start saving?Experts recommend that you replace the standard switching of dimmers.Such devices allow the light level to adjust.
After all, few people need a constant bright source of light in the kitchen, bedroom, toilet or bathroom.As a general rule, there is a fairly small power.
This is especially true for situations where you just go into the room for a minute, watch a movie or play computer games.
You can continue to save if you simply replace the usual incandescent lamps with LED.They contribute to much less energy consumption.
As far as energy receiving lights are concerned, even though they also contribute to reducing electricity costs, not all experts recommend them.
The fact is that manufacturers use Mercury during their production.
In addition, such lamps give unnatural light that cannot affect vision and significantly reduce its sharpness.In addition, their service life is not as reliable as the LED.
Although the latter is quite high, they are quickly returning.Using them, you can save the payment.
For example, a 4 W lamp will be 16 times more economical than the 75 Watt Standard incandescent lamp.And will give Sveta exactly the same amount.
Therefore, it is better to spend money on the LED lamp once than to pay more than one.
In addition, they have a validity period of about 30,000 hours according to manufacturing companies.During the average time of the workflow, 4 hours a day such a lighting component is sufficient for more than a ten years!
In addition, they are safer than ordinary fire because it almost does not heat up.View the acquisition of long -term investments and investments and more than.
You can save electricity by increasing the number of light sources around the entire perimeter of the apartment.
In this case, it is easy to control the necessary illumination.For example, there is no need to turn on the lamp throughout the bedroom or kitchen if you need to illuminate the table.
It is sufficient to turn the wall mockery or turn on the desk lamp.
How can the technique be used correctly?
The correct choice of equipment and electrical appliances promotes significant minimization of light costs:
- Remember to choose a technique in the stores with the "energy consumption" class.This letter means that iron, refrigerator, microwave oven, etc.It consumes small amounts of electricity.In addition, class B is not lower.It will be a big mistake to acquire tools in class "G" as this is the most energy.
- The size of the equipment should be chosen, depending on how many family members live in the apartment.For example, if the family consists of two people, do not buy a 5 kg laundry.In addition, in this case, you need to spend extra kilowatt electricity and start a half -empty unit.This also applies to buying a powerful refrigerator that is not needed in a family of two people.
Disconnect the electrical equipment completely if you do not use them for a while.Remember that the fork from the socket must always be turned off after the device!The reason for this is that home equipment even consumes electricity even in standby mode.Fill the same manipulations with the charger of phones, laptops and other devices.
Proper use of the refrigerator to get rid of excess expenses
If you choose a refrigerator in the store, you prefer what has no frost function.A technique with similar markings significantly reduces electricity consumption.
It is best to place the refrigerator in the coldest place in the kitchen.It will be bad to install such an element of the equipment near the stove.We recommend that you put it on the outside of the room.
He is the one who is always bigger than others.This allows the refrigerator not to overheat.
As far as freezer is concerned, it is best to fill it with products.This supports the electrical engineering temperature normal.
In addition, make sure the freezer and refrigerator door are always closed.
No need to put hot drinks, soups and other liquids on the refrigerator shelves.Allow foods on the plates, dishes or frying pan to cool on itself.It's free and you don't have to spend energy and you have to pay for extra kilowatts accordingly.It should be remembered that milk, juices, soups and other liquids should always be closed.Otherwise, moisture evaporates, which causes energy consumption.
My kitchen slab helps save me
When buying an apartment, buy the one that is installed by a gas stove.The preparation of food on it is much more profitable than it is for electricity.
You can also reduce your deposit with revenue using an induction stove.
It has the smallest power consumption, as this household appliance only heats the pan, the cauldron or the bottom of the vessels.And in the usual tiles, the burner warms up.
In addition, keep in mind that the diameter of the vessels should be slightly more than the burner to prepare the various foods.
This allows you to get better heat transfer due to closer fit to the burner.Cooking with a closed lid helps to rotate the current.
This method heats food in vessels, not in the kitchen.
Always turn off the stove 5 minutes before preparing the pan.Cook at high temperatures for initial heating and then reduce it.
Food reaches preparedness and without the use of additional energy costs.
It is desirable that the water is boiled because the kettle of the network consumes a lot.In addition, when he works, he is in great power.
Wash, ironing and went
When selecting the washing mode, keep in mind that most powder contains special parts on the basis and wipe the underwear at low temperatures.
Therefore, it is not necessary to adjust the maximum.The same rule applies to major revolutions.In addition, do not start the semi -empty washing machine.It is better to save the canvas until it is completely filled.
The residual heat can be used during ironing.To do this, turn off the iron 10 minutes before the end of the procedure.The device will be hot all the time.
Lay the food film on the ironing board.This does not spend the current on the surface of its surface.
Other effective methods
The following recommendations help minimize the costs:
- When decorating the rooms (furniture, wallpaper, floor, painting ceilings and walls), it prefers light sounds.After all, the higher the color, the more the light is reflected.In addition, much less current is needed to reach the normal illumination level.
- The next recommendation will be banal, but it will help you significantly reduce your revenue costs.You need to wash the windows more often (depending on the amount of pollution) to save electricity.The thing is, the contaminated glass always passes through the sun and natural light.As a result, high -performance configuration of dimmers should be configured.The bulbs should be wiped out of the dust at least twice a month.In this case, it all depends on the degree of pollution.
- If you buy a house, consider that the south side is brightest.This means that no further illumination will be required during the day.
- Before turning on shared systems or air conditioners, you need to make sure that there are no home designs.Otherwise, such a technique will heat the street, not the rooms.Select air conditioners based on the size of the room.This will pay much less for the light.In order to turn on the radiator as little as possible, you can place the windows from plastic.Even though this joy is not cheap, it will be completely returned over the years.
The outdated TV or computer monitor is best changed for the newer (LED, etc.).The technique of old style has a lot of energy consumption.
Modern technology consumes very little electrical energy.Do not turn on the scanner, the printer is superfluous.